Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 24 Next »

In this page, we will guide you through connecting the VR app to the Hub.

These steps are important, please do not skip.


This guide assumes that you have already:

 Detailed Instructions

 Step One: Launch ControlRoom on your VR Headset

If you need assistance with this step please refer to the pages here:

Oculus Rift Installation

Oculus Quest Installation

 Step Two: Watch the Intro Video and Start the in-app Tutorial

A. Use the trigger button on your right controller to point and select the Play button to watch the intro video.

B. After the video has finished, start the tutorial by selecting the button in front of you.

 Step Three: Enter DAW Connection Mode

At the conclusion of the tutorial, you’ll have options to enter Standalone Mode or DAW Control Mode.

A. Enter DAW Control Mode to be able to control your DAW from VR.

B. Open the menu, and then the Settings page by selecting the Gear Icon.

 Step Four: Prepare the Hub for Connection.

At this point, the VR application is ready to connect to ControlRoom Hub.

If you have already installed and launched ControlRoom Hub on your Studio DAW Computer, continue to Step Five below.

If you have not yet installed and launched ControlRoom Hub on your Studio DAW computer, please do that now. Follow this link for instructions.

 Step Five: Connect VR with the Hub
  • Within the Hub, navigate to the Settings Page, and then select the Network tab.

  • In the list of devices, toggle your VR headset ON.

  • In VR, toggle ON the Hub instance that has been detected.

  • If all goes well, you should see a message indicating a successful connection.

If you do not see the your devices in the Hub or VR menu, please ensure that your VR headset is connected to the same wifi network as your DAW computer running the Hub. If you need further assistance, please follow the links at the bottom of this page.

Next, select which DAW you’d like to use with ControlRoom:

(before proceeding, you must complete the setup steps on this page)


  1. Launch the ControlRoom VR application on your headset.

  2. Watch the intro video and complete the in-app tutorial.

  3. Connect your VR headset to ControlRoom Hub.

  4. Follow DAW setup instructions for your DAW of choice.

Have more questions about this process? Check out our FAQ page.

Still have questions about setting up VR or have suggestions about how we could improve this page? Try our customer service portal.

  • No labels